Maintenance bicycle to be durable is one of the mandatory for bicycle lovers, things that must to do so that the bicycle is durable and long-lasting.
Especially mountain bikes that are often used and also ordinary bicycles on the streets are not free from the dirt, for that the bike needs to be regularly maintained so that it is durable and not easily damage.
Some cyclists prefer to do maintenance on their bike at regular bicycle repair shops, some others prefer to do their own maintenance.
In order not to make the wrong bike maintenance, we have summarized 10 simple ways to care for a bicycle so that it doesn’t get damaged quickly. This method can be used to treat at MTB bikes, folding bikes, road bikes, hybrids, city bikes, tandem bikes, and so on.
Simple Steps to Maintenance Bicycle
1. Keep the bicycle clean
Maintenance bicycle, Try to keep the bike clean. If you leave the dirt on the bike for too long, it can cause rust, corrosion, which will shorten the life of the bicycle.
For the bicycle to be kept clean after the bicycle is used, try to clean it immediately, if the bicycle is very , you can immediately wash it with soap, but if it is not too , just wipe it with a damp cloth.

Source Image : shutterstock.com
When washing the bicycle, you need to be careful, especially on the parts of the bicycle that are prone to water, such as the bicycle hub and the bottom bracket (BB). If the water gets in, we can be sure that we have to break it down or at least enter the workshop because it is dangerous to damage.
2. Clean the lower frame
After the bicycle is used up, usually the front fork, down tube, seat tube, chainstay, and seat stay are places where all the dirt sticks. Make sure there are no dirties on these parts. To Maintenance bicycle clean it can be sprayed with water or use a wet cloth.

Source Image : shutterstock.com
Read: Cycling, Health and Fitness
3. Clean the chain
Cleaning the bicycle chain is very easy, it’s part of job to maintenance bicycle, use a damp cloth or cloth that has been given a soap and then turn the chain until all the dirt sticks.
Also, you can use a toothbrush to reach hard-to-reach places on the chain to clean the bicycle chain, If you don’t want to be bothered when a bicycle chain cleaner is available, just put it in then just turn.

Source Image : shutterstock.com
4. Clean up the groupset
The bicycle groupset is the part that moves the most after the bicycle tires. To maintenance bicycle make sure all group sets starting from the brake handle, shifter, RD, FD, BB, crank, chain, sprocket are all normal so they don’t interfere with performance when riding. For parts other than the chain, you can wipe it with a damp cloth.
For the crank, chain, FD, RD, this sprocket is the most prone to getting , especially if you use cheap lubricants, all the dirt will stick. The solution can be to use a dry lubricant that is safer from the dirt that sticks to it.

Source Image : shutterstock.com
5. Clean the wheelset and tires
The wheelset is one of the important drivetrains in a bicycle, the parts included in this wheelset are the hub, spokes, rim brake, and tires.
to maintenance bicycle Make sure all of these parts are clean because they are parts that are in direct contact with the road or ground media. The easiest way to clean the wheelset is by spraying water and then cleaning it with soap. It should be noted, especially on the hub, not to get water in.
6. Check the braking system
Brakes are one of the most important bicycle components for safety. If the brakes do not work normally it can harm us. For this reason, bicycle brakes need to be maintained regularly, make sure that the brake pads are still thick so that braking can be maximized.
Also, check the cable and brake fluid whether it is still functioning normally or not. To maintain a bicycle that uses hydraulic brakes or uses fluid, the maintenance method is more difficult than the brakes that still use an ordinary cable mechanism. It is necessary to clean this part of the brake as often as possible so that the dirt does not stick, which results in the brakes not working optimally.

Source Image : shutterstock.com
7. Check the Shifting System
To Maintenance bicycle make sure the bike gear shifting system is running normally. The trick is to try to move up and down the gearshift from the largest to the smallest, whether there is something stuck or not. If there is a problem, you can adjust it with two setting bolts on the FD and RD of each bicycle. Just tighten or loosen as needed.
8. Give Lubrication
The next way to maintenance bicycle bicycle is to provide lubrication. The chain is the main part that must always be given optimal lubrication because this is a part that moves a lot.

Source Image : shutterstock.com
Avoid using lubrication from used oil because it will only cause dirt on the chain, use a dry lubricant, or a special motorbike lubricant.
9. Check Tire Pressure
In addition to providing performance when used, the air pressure also has a function to maintain the elasticity of the tire itself.
A tire that is filled with air according to the manufacturer’s recommendations will last longer. We recommend that you check the pressure regularly, especially when leaving for cycling, to make sure that the tire pressure is according to the standard in order to avoid leaking on the road.
An easy way to check tire pressure is appropriate or not is to use a bicycle pump that has a gauge, tire pressure can be seen directly

Source Image : shutterstock.com
10. Make sure the Bolts Are Installed Correctly
Now the last thing to maintenance bicycle is to make sure the bicycle bolts are installed correctly.
As you use your bicycle more often, the bolts can become less tight because they hold the bicycle components together. Therefore, in bicycle maintenance, it is necessary to ensure that all nuts and bolts are in accordance with their tightness.

Source Image : shutterstock.com
So, here are 10 simple steps on how maintenance bicycle for a bicycle so that it doesn’t get damaged quickly. Keep in mind that a bicycle that is stored is not necessarily in a more durable condition, so it is necessary to periodically maintain the bicycle so that it does not get damaged quickly.